Designed to be deployed with a variety of pre-defined plug-and-play smart sensors including: T-MAG-SCT-600, S-FS-CVIA, Tel 7001, T-WNB-3Y-208, S-LIB-M003, ADAPT-SER-USB.
System of Interest: Electric Motors And Drives
Provides electricians with accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment.
Is an Electrical Troubleshooting Kit that features three tools with 5 functions. The CB10 is an AC Circuit Breaker Finder/Receptacle Tester that locates circuit breakers and tests receptacle wiring.
A sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second).
A input cable for connecting 3rd party sensors with a DC Voltage output to a HOBO U12, UX120, MX1100, or ZW series external-channel data logger, to expand the range of measurement options and applications.
A self-powered transformer for monitoring sine wave, single-phase AC voltage. Can be plugged directly into the external input jacks of U12 and ZW loggers.
Responsive over the range of 7.5-75 amps AC. Mounted around a current carrying wire to measure AC amperage. Provides a 0 to .333 V AC output proportional to current flow. Window opening of 0.40 inch. Used with T-VER-E50B2, H22-001 series loggers.
Responsive over the range of 60-600 amps AC. Mounted around a current carrying wire to measure AC amperage. Provides a 0 to .333 V AC output proportional to current flow. Window opening of 2 inches. Used with T-VER-E50B2, H22-001 series loggers.
Responsive over the range of 60-600 amps AC. Mounted around a current carrying wire to measure AC amperage. Provides a 0 to .333 V AC output proportional to current flow. Used with U12 or UX120-series loggers.
Responsive over the range of 5-50 amps AC. Mounted around a current carrying wire to measure AC amperage. Provides a 0 to .333 V AC output proportional to current flow. Used with U12 or UX120-series loggers.