A power quality analyzer which measures voltage, current, frequency, power, power consumption, unbalance, flicker, and harmonics in three- and single-phase power distribution systems.
A power management and energy efficiency meter that integrates with loggers such as the UX120-017, enabling you to measure power factor (PF), reactive power (VAR), watt hours (Wh), and more. Compatible with CTs from 5 to 32,000 A (333mV output) for current measurements.
A power quality analyzer which provides advanced demand, energy, harmonics and power analysis, as well as display of phasors, scope mode, meters, harmonic spectrums, and sag/swell detection.
A motor on/off standalone data logger that monitors a motor’s on and off conditions using an internal AC magnetic field sensor. HOBOware Pro or HOBOware free software is required for logger operation.
A motor on/off standalone data logger that records motor on and off status using the AC field generated by the motor, making it ideal for equipment monitoring. HOBOware Pro or HOBOware free software is required for logger operation.
A photo tachometer device that measures the angular speed of a rotating shaft in motors, in terms of revolutions per minute (RPM).
A laser photo/contact tachometer measures the RPM value of motors and conveyor belts with a laser pointer and reflective tape. Provides wide RPM (photo and contact) and Linear surface speed (contact) measurements. Memory stores last, max and min readings.
A kWh transducer which measures energy and power, and is placed in an electric service panel. The Wye-connection works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Used with U12 or UX120-series loggers.
A kilowatt hour transducer with a Three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand). Accepting an input primary voltage of 480 Volts AC rms, this transducer requires a Pulse Input Adapter.
A infrared thermometer which measures the temperature of objects and surfaces both from a distance and through contact with a distance-to-spot ratio of 30:1.