A boiler system provides either hot water or steam to distribute the heating load within a facility.
Combines the functions of a clamp meter, oscilloscope, data logger and digital power meter in one device. Measures Power factor (PF), Reactive Power (VAR), Watt Hours (Wh), Kilowatt hours (kWh), AC Current, AC Voltage and more.
Use this kit to make an assessment on steam traps in a facility.
Use this kit to establish and improve maintenance productivity at a facility.
Use this kit to determine whether a hot water temperature reset schedule based on outdoor air temperature is in use and operating properly.
Use this kit to assess hot water delta T, condensing boiler operation and condesnate return temperature.
Use this kit to measure the energy consumption of a facility’s boiler system used for space heating.
Use this kit to look at both burner motor cycling and stack temperature to obtain a deeper understanding of the heating plant’s efficiency.
Used for condition monitoring and predictive maintenance. The UL101 is capable of accurately interpreting sounds created by under-lubrication, over-lubrication, and early signs of wear. Distance of reception is up to 150 ft (50 m) and threshold of sensitivity is 0 dB SPL.
Measures true-RMS AC voltage and current for accurate measurements on non-linear signals.
Offers a three-phase electrical energy logger used for performing energy surveys and load studies. Measures voltage, current, power and power factor. Data can be downloaded from the logger onto a USB stick.