A wireless gateway connects WirelessHART networks with host systems and data applications. It has the capacity to support up to 100 devices while providing top of the line security, scalability, and data reliability.
A energy logger designed to be deployed with a variety of pre-defined plug-and-play smart sensors including: T-MAG-SCT-600, S-FS-CVIA, Tel 7001, T-WNB-3Y-208, S-LIB-M003, ADAPT-SER-USB.
A electronic switch pulse sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second).
A differential air pressure which utilizes a highly accurate and stable sensor, which is microprocessor profiled for improved accuracy and reliability. Used with the UX120-006M or U12-006.
A differential air pressure sensor which monitors and reports the differential air pressure reading between two points (e.g., above vs. below a raised floor or room vs. plenum). Tubing can be routed above/below floors, along walls, plenums or air ducts. Uses the M250 receiver.
A router which provides connectivity with other wireless network nodes by expanding the reach of the wireless network and transmitting data from the data nodes to the data receiver. Works with ZW-RCVR, ZW-001, ZW-003, ZW-005, ZW-007, and ZW-008.
A DC voltage input cable for connecting 3rd party sensors with a DC Voltage output to a HOBO U12, UX120, MX1100, or ZW series external-channel data logger, to expand the range of measurement options and applications.
A compressed air flow meter sensor featuring two probes, with one probe warmer than the other. This configuration determines mass velocity by measuring the heat differential. Used for flow rate monitoring to ensure that the required air flow rate is maintained for machines or pneumatics.
A receiver which serves as the central hub of the wireless data mesh network. It collects and stores data, and operates as a bridge between the network and the computer software. It can also send commands to the node so the data collection methods can be easily adjusted. Works with the ZW-Router, ZW-001, ZW-003, ZW-005,… Continue reading Data Receiver
CO2 Sensor to Logger Cable (20.3cm – 8 inches) for use with HOBO Analog data loggers.