Solar Panel for charging Web Based Data Logger
Equipment Type: Sensor
A type K thermocouple probe which can measure up to 900°C (1650°F) when connect to the UX100 thermocouple logger. It can be used for measuring stack temperature of a boiler.
A light sensor level over the PAR or solar radiation sensor to determine if the sensor is level.
A light sensor bracket is designed for use with tripods, masts, or flat surfaces. Use to avoid obstructions and shadows that could affect your PAR or solar radiation measurements. Includes leveling screws.
A 1-foot light pipe attachment for HOBO UX90 Occupancy & Light data loggers, helps eliminate the effects of ambient sunlight when monitoring room light usage.
A kWh transducer which measures energy and power, and is placed in an electric service panel. The Wye-connection works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Used with U12 or UX120-series loggers.
Battery Charger for Web based data logger
A gauge pressure sensor which provides precision pressure measurements in compressed air systems, water or other compatible gases and fluids with an accuracy of +/- 1% FS from -20°C to 85°C (-4°F to 185°F) for up-to 500psi. Use with the UX120-006M or U12-006 loggers.
FlexSmart Analog Input Module for use with the H22-001 Energy Logger handles two single-ended input channels with user-configurable ranges of 0 to 20mA DC or 0 to 20 V DC which is suitable for 2.5-, 5-, and 10-volt sensors.
An external temperature and relative humidity data logger is a weather-resistant device equipped with a sensor on a 6-foot cable, designed for quick response times and easy deployment in confined or hard-to-reach areas.