Secondary Chilled Water Pumps Measurement Kit

Use this kit to measure the energy consumption of retrofitted pumps in the secondary loop of a chilled water pump system with variable frequency drives (VFDs) and/or more efficient motors.

Typical Use

  • One power quality clamp meter (Fluke345) & Dent Logger (EXCUNC) per building
  • One 4-channel analog logger (UX120-006M) per panel board
  • Three current sensors per panel board
  • One motor on/off logger (UX90-004) per motor
  • One Temp/RH data logger (MX2301) per building

Equipment Included in Kit

Power Quality Clamp Meter

Combines the functions of a clamp meter, oscilloscope, data logger and digital power meter in one de...

2 item(s) available

Energy Logger

Capable of analyzing electrical consumption data derived from voltage and current inputs. Uses direc...

9 item(s) available

4-Channel Analog Data Logger

An analog logger that supports up to four external sensors allowing you to measure temperature, curr...

26 item(s) available

Motor on/off Logger UX90-004

Standalone data logger that monitors a motor’s on and off conditions using an internal AC magnetic...

97 item(s) available

Temp/RH MX2301

Weatherproof data logger that measures and records temperature and relative humidity in outdoor envi...

35 item(s) available

Frequently Asked Questions

Where can I find more information on how to use this kit?

We recommend looking at the Related Guides for information on how to set-up, install, and interpret data along with measurement approaches and special considerations.

Can I use this kit to measure pump power consumption in systems with air- and water-cooled chillers?

Yes, you can measure both types of systems. Refer to the related M&V guide for more detail and measurement approach.