External Temperature/Relative Humidity Data Logger is a weatherproof data logger with an external Temperature and Relative Humidity sensor on a 6-foot cable for fast sensor response and deployment in tight spaces.
Capable of analyzing electrical consumption data derived from voltage and current inputs. Uses direct connections to each phase of the voltage and various interchangeable CT options such as split-core current transformers.
Designed to be deployed with a variety of pre-defined plug-and-play smart sensors including: T-MAG-SCT-600, S-FS-CVIA, Tel 7001, T-WNB-3Y-208, S-LIB-M003, ADAPT-SER-USB.
A sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second).
A differential pressure manometer which measures gauge and differential pressure in the +/-0.500 PSI range. Offers 11 units of measurement and has differential input that uses convenient quick-disconnect fittings.
A differential pressure manometer with a measuring range of up to 30 PSI, ideal for applications such as valve monitoring, control sensors in pneumatic systems, HVAC/R pressure measurement, and medical pressure monitoring.
A differential air pressure which utilizes a highly accurate and stable sensor, which is microprocessor profiled for improved accuracy and reliability. Used with the UX120-006M or U12-006.
A differential air pressure sensor which monitors and reports the differential air pressure reading between two points (e.g., above vs. below a raised floor or room vs. plenum). Tubing can be routed above/below floors, along walls, plenums or air ducts. Uses the M250 receiver.
A router which provides connectivity with other wireless network nodes by expanding the reach of the wireless network and transmitting data from the data nodes to the data receiver. Works with ZW-RCVR, ZW-001, ZW-003, ZW-005, ZW-007, and ZW-008.
A compressed air flow meter sensor featuring two probes, with one probe warmer than the other. This configuration determines mass velocity by measuring the heat differential. Used for flow rate monitoring to ensure that the required air flow rate is maintained for machines or pneumatics.