A boiler system provides either hot water or steam to distribute the heating load within a facility.
Beaded Thermocouple probe includes 1.8m (6′) of insulated 30-AWG wire wound on an integrated spool caddy /subminiature connector. Color-coded for type J (black) thermocouples according to the ANSI standard.
A six-foot beaded thermocouple probe. This probe is Teflon-insulated and responsive over a range of -200 to 100℃ (-328 to 212℉) with an initial accuracy of +/- 1.5℃ (+/-2.7℉).
Type K thermocouple probe can measure up to 900°C (1650°F) when connect to the UX100 thermocouple logger.
Combines the functions of a clamp meter, oscilloscope, data logger and digital power meter in one device. Measures Power factor (PF), Reactive Power (VAR), Watt Hours (Wh), Kilowatt hours (kWh), AC Current, AC Voltage and more.
Capable of simultaneously capturing thousands of parameters, such as low-medium-high frequency transients through peak, waveshape, RMS difference, and adaptive high-speed sampling, as well as power measurements to clearly characterize harmonics, non-sinusoidal, and unbalanced systems.
Measures voltage, current, frequency, power, power consumption, unbalance, flicker, and harmonics in three- and single-phase power distribution systems.
Provides advanced demand, energy, harmonics and power analysis, as well as display of phasors, scope mode, meters, harmonic spectrums, and sag/swell detection.
A power management and energy efficiency meter that integrates with loggers such as the UX120-017, enabling you to measure power factor (PF), reactive power (VAR), watt hours (Wh), and more. Compatible with CTs from 5 to 32,000 A (333mV output) for current measurements.
Enables fast and accurate measurement for sampling of light industrial, institutional, commercial and residential furnaces, boilers and appliances. Evaluate safety operating conditions and determine combustion efficiency via emission testing.
Standalone data logger that monitors a motor’s on and off conditions using an internal AC magnetic field sensor. HOBOware Pro or HOBOware free software is required for logger operation.