Simultaneously measures and logs data for several ventilation parameters using a single probe with multiple sensors. It measures velocity, temperature, and relative humidity, and calculates flow, wet bulb, and dew point temperature.
Measures air flow, air velocity, and temperature. Ideal applications include system performance, commissioning, plant maintenance, critical environment certification, and duct traverses.
Provides precision pressure measurements in compressed air systems, water or other compatible gases and fluids with an accuracy of +/- 1% FS from -20°C to 85°C (-4°F to 185°F). Use with the UX120-006M or U12-006 loggers.
A four-channel wireless data node with two analog ports and two pulse input ports. It wirelessly transmits data in real time using a mesh network of devices. Works with ZW-RCVR and ZW-Router.
A four-channel wireless data node that uses external sensors to measure data, rather than internal sensors built inside of the device. It supports temperature, AC current/voltage, air velocity, carbon dioxide, compressed air flow, DC current, DC voltage, gauge pressure, kilowatts, and volatile organic compound (VOC) measurements.
A four-channel wireless data node with four analog ports. It accepts external sensors and wirelessly transmits data in real time using a mesh network of devices. Works with ZW-RCVR and ZW-Router.
A wireless gateway connects WirelessHART networks with host systems and data applications. It has the capacity to support up to 100 devices while providing top of the line security, scalability, and data reliability.
With a measuring range up to 30 PSI, this manometer is perfect for applications such as valves, control sensors in a pneumatic control environment, HVAC/R pressure levels, and medical pressure systems.
Measures gauge and differential pressure in the +/-0.500 PSI range. Offers 11 units of measurement and has differential input that uses convenient quick-disconnect fittings.
Monitors and reports the differential air pressure reading between two points (e.g., above vs. below a raised floor or room vs. plenum). Tubing can be routed above/below floors, along walls, plenums or air ducts. Uses the M250 receiver.