A occupancy/light standalone data logger that monitors room occupancy and indoor light changes to identify occupancy patterns and determine energy usage. HOBOware Pro or HOBOware free software is required for logger operation.
A motor on/off standalone data logger that records motor on and off status using the AC field generated by the motor, making it ideal for equipment monitoring. HOBOware Pro or HOBOware free software is required for logger operation.
A light sensor bracket is designed for use with tripods, masts, or flat surfaces. Use to avoid obstructions and shadows that could affect your PAR or solar radiation measurements. Includes leveling screws.
A light sensor level over the PAR or solar radiation sensor to determine if the sensor is level.
A light on/off standalone data logger that monitors indoor light changes with an internal sensor and records light on and off conditions.
A 1-foot light pipe attachment for HOBO UX90 Occupancy & Light data loggers, helps eliminate the effects of ambient sunlight when monitoring room light usage.
A light on/off standalone data logger that monitors indoor light changes with an internal sensor and records light on and off conditions.
A light on/off data logger which records light on and off conditions, the light threshold is adjustable from 10 to 100 lumens/m2. HOBOware Pro or HOBOware free software is required for logger operation.
A kWh transducer which measures energy and power, and is placed in an electric service panel. The Wye-connection works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Used with U12 or UX120-series loggers.
A kilowatt hour transducer with a Three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand). Accepting an input primary voltage of 480 Volts AC rms, this transducer requires a Pulse Input Adapter.