The core of our mission is to get the right tools for the job into your hands. Search the catalogue by equipment type, measurement type, or building system, and add items to your cart to borrow free of cost. If we don’t have what you’re looking for, let us know what you’d like to see in the catalog.
A three-phase electrical energy logger used for performing energy surveys and load studies. Measures voltage, current, power and power factor. Data can be downloaded from the logger onto a USB stick.
A six-foot beaded thermocouple probe. This probe is Teflon-insulated and responsive over a range of -200 to 100℃ (-328 to 212℉) with an initial accuracy of +/- 1.5℃ (+/-2.7℉). Ideal for measuring surface temperature.
Beaded Thermocouple probe includes 1.8m (6′) of insulated 30-AWG wire wound on an integrated spool caddy /subminiature connector. Color-coded for type J (black) thermocouples according to the ANSI standard.
A power quality analyzer which measures voltage, current, frequency, power, power consumption, unbalance, flicker, and harmonics in three- and single-phase power distribution systems.
A power quality analyzer that is capable of simultaneously capturing thousands of parameters, such as low-medium-high frequency transients through peak, waveshape, RMS difference, and adaptive high-speed sampling, as well as power measurements to clearly characterize harmonics, non-sinusoidal, and unbalanced systems.
A power management and energy efficiency meter that integrates with loggers such as the UX120-017, enabling you to measure power factor (PF), reactive power (VAR), watt hours (Wh), and more. Compatible with CTs from 5 to 32,000 A (333mV output) for current measurements.
A power quality analyzer which provides advanced demand, energy, harmonics and power analysis, as well as display of phasors, scope mode, meters, harmonic spectrums, and sag/swell detection.
A kilowatt hour transducer with a Three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand). Accepting an input primary voltage of 480 Volts AC rms, this transducer requires a Pulse Input Adapter.
A gauge pressure sensor which provides precision pressure measurements in compressed air systems, water or other compatible gases and fluids with an accuracy of +/- 1% FS from -20°C to 85°C (-4°F to 185°F) for up-to 500psi. Use with the UX120-006M or U12-006 loggers.
FlexSmart Analog Input Module for use with the H22-001 Energy Logger handles two single-ended input channels with user-configurable ranges of 0 to 20mA DC or 0 to 20 V DC which is suitable for 2.5-, 5-, and 10-volt sensors.