A 1-foot attachment for HOBO UX90 Occupancy & Light data loggers, helps eliminate the effects of ambient sunlight when monitoring room light usage.
Standalone data logger that monitors indoor light changes with an internal sensor and records light on and off conditions.
Records light on and off conditions, the light threshold is adjustable from 10 to 100 lumens/m2. HOBOware Pro or HOBOware free software is required for logger operation.
This Watt energy meter helps reduce your electricity bill. Simply connect appliances to the meter, and it will assess how efficient they really are by monitoring voltage, line frequency, and power factor.
Measures energy and power, and is placed in an electric service panel. The Wye-connection works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Used with U12 or UX120-series loggers.
Three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand). Accepting an input primary voltage of 480 Volts AC rms, this transducer requires a Pulse Input Adapter.
Battery Charger for Web based data logger
A data logging software used for all HOBO data loggers and wireless data nodes. You can easily set up your application in a matter of minutes, quickly read out and plot data, and export to spreadsheets for further analysis all with an intuitive, point-and-click interface.
Provides precision pressure measurements in compressed air systems, water or other compatible gases and fluids with an accuracy of +/- 1% FS from -20°C to 85°C (-4°F to 185°F). Use with the UX120-006M or U12-006 loggers.
FlexSmart Analog Input Module for use with the H22-001 Energy Logger handles two single-ended input channels with user-configurable ranges of 0 to 20mA DC or 0 to 20 V DC which is suitable for 2.5-, 5-, and 10-volt sensors.